Page 7 - Domus Ventures Patio Pool Furniture

StoneTEC

StoneTEC is a 5-layer composite system comprising high-
performance bonding agents, natural mineral granules, hard- WoodTEC
wearing topcoat with UV inhibitors applied onto tempered
glass surface.

• Stone-effect finish WoodTEC is a wood-plastic composite made out of wood fiber and
• Weights up to 80% less than traditional stone plastics. It combines both the advantages of wood-like surface
• Can be used for outdoor and indoor texture with durability of plastic.
• High tensile strength
A major advantage over wood is the ability of the material to be
molded to meet almost any desired spatial conditions and requires
Cleaning and Maintenance less maintenance than the solid wood. It behaves like wood and
• Clean the tabletop regularly using a soft brush and lots of water. can be shaped using conventional woodworking tools.
• If heavily soiled, you may add a small amount of diluted washing-
up liquid to lukewarm water, then rinse thoroughly with clean They are moisture-resistant and resistant to rot but they are not as
water. rigid as wood and may slightly deform in extremely hot weather.
• To prevent damaging your tabletop, please avoid the
following: • Moisture-resistant
1. Do not cover the table with plastic or canvas tablecloth. • Resistant to rot
This can encourage the growth of mould which may • Weatherproof approx. from -20° C to 60° C (-4 F to 140 F)
discolor the tabletop surface.
2. Do not use strong chemical cleaning agents, abrasives
or solvents. These will damage the surface finish. Cleaning and Maintenance
3. Dry-up any spillage with a damp cloth or sponge. 1. Clean the WoodTEC regularly using a soft sponge or cloth and
4. Do not allow any spilled wine or vegetable oil to stand lots of water. If heavily soiled, you may add a small amount of
for any length of time as these may create stains. diluted washing-up liquid to lukewarm water, then rinse
Clean-up quickly. thoroughly with clean water.
2. To remove oil and stains as soon as they occur by using
household de-greasing agent and stiff bristle brush to scrub away
any greasy and oily stains, and later rinsing it with warm water.
3. Pressure washing is also a good idea from time to time to
remove built-up dirt and debris. When using a pressure washer,
do not exceed 1800psi with a 20-degree nozzle.
4. Do not use sharp object to scratch the surface. This can leave
permanent scratch mark on the surface.

- 6 -